Pellet Stove Parts S1902/HP22
RC1902 Remote Control
Prix 49.00
Vente32.00
Vous économisez 17.00 (35%)
RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.
CB1902 Control Board
Prix 249.00
Vente219.00
Vous économisez 30.00 (12%)
CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.
RIB1902 Cable
Prix 49.00
Vente39.00
Vous économisez 10.00 (20%)
RIB1902:
Ribbon cable that connects the program board with the power board - for model S1902 and HP-22.
EXM1902 Exhaust Motor
Prix 219.00
Vente189.00
Vous économisez 30.00 (14%)
EXM1902: Exhaust blower has a vertical position for minimum wear on bearings and is located at rear right of pellet stove, quite operation, speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
AUM1902 Auger Motor
Prix 229.00
Vente189.00
Vous économisez 40.00 (17%)
AUM1902: A new and unique Auger motor design to give more reliability and strength with  a very quite operation, located at rear of pellet stove just bellow hopper - for model S1902 and HP-22.
COF1902 Convection Blower / Motor
Prix 229.00
Vente189.00
Vous économisez 40.00 (17%)
COF1902: A squall cage design convection motor with a very quite operation is located at the center / rear of the fire box, can be removed very quickly, the speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
MCA1902 Auger Motor Capacitor
Prix 29.00
Vente19.00
Vous économisez 10.00 (34%)
MC1902: Motor capacitor which is clipped onto frame close to auger motor. Gives more stability and torque to auger motor - for model S1902 and HP-22.
IG1902 Igniter
Prix 159.00
Vente139.00
Vous économisez 20.00 (13%)
IG1902:    
Used for igniting the pellets, to allow for automatic operation for model S1902 and HP-22. The pellet stove Igniter comes with the cable and connector.
The collar/nut on older igniters needs to be removed and put onto the new igniter, also the elect. connector on old igniter needs to be cut and re-connected to the new igniter.

TC1902 Thermostat Closing
Prix 29.00
Vente25.00
Vous économisez 4.00 (14%)
TC1902: Thermostat located on the exhaust motor housing to let the computer know that a fire has been established. Closes at 120F - for model S1902 and HP-22.
THI1902 Thermostat High Limit
Prix 39.00
Vente35.00
Vous économisez 4.00 (10%)
TH1902: High limit thermostat located at the rear left side of body, lets the computer know that a too high of a temperature has been reached - for model S1902 and HP-22.
Votre Panier
Votre panier est vide
Offres Spéciales
Langues
Arabic Brazilian Czech German Greek English Spanish Finnish French Croatian Hungarian Italian Lithuanian Latvian Dutch Norweigian Polish Portuguese Russian Slovak Swedish Turkish Ukrainian Vietnamese